Truck Mounted Drilling Rig

9000m Drilling RigsWith the max. drilling depth of 9000m, the land drilling rig is mainly used for oil and gas exploration and development on wells that are 6000~7000m (drill pipe 4 1/2&rdquo;) or 5000~8000m (drill pipe 5&rdquo;) deep.The basic parameters, structure, design and manufacture are according with international general specifications, including API, IEC and HSE. Details of major equipments fully reflect the design concept of Health, Safety and Environmental Protection.Adopting module design, the drilling rig has a compact structure. With sound-proofing and noise-reduction design, the generator room can reduce the harm to environment and people as much as possible.The drilling rig is designed to work in ambient temperature of -20&deg;C ~+55&deg;C. All the systems and equipments adopt high-temperature resistant components and air-cooling method. The drill can adapt to the high temperature, desert, with more rain/r/n environments.7000m Drilling RigsWith the max. drilling depth of 7000m, the land drilling rig is mainly used for oil and gas exploration and development on wells that are 4500~7000m (drill pipe 4 1/2&rdquo;) or 4000~6000m (drill pipe 5&rdquo;) deep.The basic parameters, structure, design and manufacture are according with international general specifications, including API, IEC and HSE. Details of major equipments fully reflect the design concept of Health, Safety and Environmental Protection.Adopting module design, the drilling rig has a compact structure. With sound-proofing and noise-reduction design, the generator room can reduce the harm to environment and people as much as possible.The drilling rig is designed to work in ambient temperature of -20&deg;C ~+55&deg;C. All the systems and equipments adopt high-temperature resistant components and air-cooling method. The drill can adapt to the high temperature, desert, with more rain/r/n environments.5000m Drilling RigsWith the max. drilling depth of 5000m, the land drilling rig is mainly used for oil and gas exploration and development on wells that are 3500~5000m (drill pipe 4 1/2&rdquo;) or 2800~4500m (drill pipe 5&rdquo;) deep.The basic parameters, structure, design and manufacture are according with international general specifications, including API, IEC and HSE. Details of major equipments fully reflect the design concept of Health, Safety and Environmental Protection.Adopting module design, the drilling rig has a compact structure. With sound-proofing and noise-reduction design, the generator room can reduce the harm to environment and people as much as possible.The drilling rig is designed to work in ambient temperature of -20&deg;C ~+55&deg;C. All the systems and equipments adopt high-temperature resistant components and air-cooling method. The drill can adapt to the high temperature, desert, with more rain/r/n environments.4000m Drilling RigsWith the max. drilling depth of 4000m, the land drilling rig is mainly used for oil and gas exploration and development on wells that are 2500~4000m (drill pipe 4 1/2&rdquo;) or 2000~3200m (drill pipe 5&rdquo;) deep.The basic parameters, structure, design and manufacture are according with international general specifications, including API, IEC and HSE. Details of major equipments fully reflect the design concept of Health, Safety and Environmental Protection.Adopting module design, the drilling rig has a compact structure. With sound-proofing and noise-reduction design, the generator room can reduce the harm to environment and people as much as possible.The drilling rig is designed to work in ambient temperature of -20&deg;C ~+55&deg;C. All the systems and equipments adopt high-temperature resistant components and air-cooling method. The drill can adapt to the high temperature, desert, with more rain/r/n environments.3000m Drilling RigsWith the max. drilling depth of 3,000m, the land drilling rig is mainly used for oil and gas exploration and development on wells that are 1600~3000m (drill pipe 4 1/2&rdquo;) or 1500~2500m (drill pipe 5&rdquo;) deep.The basic parameters, structure, design and manufacture are according with international general specifications, including API, IEC and HSE. Details of major equipments fully reflect the design concept of Health, Safety and Environmental Protection.Adopting module design, the drilling rig has a compact structure. With sound-proofing and noise-reduction design, the generator room can reduce the harm to environment and people as much as possible.The drilling rig is designed to work in ambient temperature of -20&deg;C ~+55&deg;C. All the systems and equipments adopt high-temperature resistant components and air-cooling method. The drill can adapt to the high temperature, desert, with more rain/r/n environments.Low Temperature DrillingAmbient Temperature/r/n -45℃~+40℃.Low temperature steel.Winterization Design.Equipped With Heating System .Apply to arctic area , such as Russian or Siberia Region.Teaching DrillingThe rig can be used not only for full training purpose but also for drilling well with Max. depth 1000 meter./r/nThere is a modernized classroom on the left side of the drill floor, for students to observe and study; and inside there are integrated teacher's chair and student's chair. The entire driller's operation process can be replayed on the big screen in front of the classroom by synchronized closed-circuit projection system, for easy real time explanations./r/nDW speed and function control adopts &ldquo;hydraulic disc brake+ dynamic brake + AC VF control&rdquo;./r/n375 ft Jack-up Drilling UnitThe three-leg drilling platform is a steel, triangular, cantilever, non-propelling type./r/nThe hull of main platform is designed as box structure. Its platform resembles a trigon. Three columnar legs locate two legs in the stern and one in the bow. Spud can for each leg is fully retracted inside the main hull while towing. Each leg is fixed to the hull through twelve (12) jacking units to support main hull at proposed height. Raising and lowering of the legs is accomplished by means of electric powered pinions driving racks built into each leg.350ft Jack-up Drilling UnitThe three-leg drilling platform is a steel, triangular, cantilever, non-propelling type./r/nThe hull of main platform is designed as box structure. Its platform resembles a trigon. Three columnar legs locate two legs in the stern and one in the bow. Spud can for each leg is fully retracted inside the main hull while towing. Each leg is fixed to the hull through twelve (12) jacking units to support main hull at proposed height. Raising and lowering of the legs is accomplished by means of electric powered pinions driving racks built into each leg.300ft Jack-up Drilling UnitThe three-leg drilling platform is a steel, triangular, cantilever, non-propelling type./r/nThe hull of main platform is designed as box structure. Its platform resembles a trigon. Three columnar legs locate two legs in the stern and one in the bow. Spud can for each leg is fully retracted inside the main hull while towing. Each leg is fixed to the hull through twelve (12) jacking units to support main hull at proposed height. Raising and lowering of the legs is accomplished by means of electric powered pinions driving racks built into each leg.160ft Jack-up Drilling UnitThe three-leg drilling platform is a steel, triangular, cantilever, non-propelling type./r/nThe hull of main platform is designed as box structure. Its platform resembles a trigon. Three columnar legs locate two legs in the stern and one in the bow. Spud can for each leg is fully retracted inside the main hull while towing. Each leg is fixed to the hull through twelve (12) jacking units to support main hull at proposed height. Raising and lowering of the legs is accomplished by means of electric powered pinions driving racks built into each leg.30ft Submersible Drilling RigThis unit is a rectangle non-self-propelled steel submersible drilling rig, consisting of three parts: mat, upper structure and intermediate support. The mat is a box structure with 45&deg; slope around. At the stern of mat,there is a 40ft width slot.Truck Mounted Drilling Rig1.With an optimum structure and high-level integration, the whole rig requires a small working space.2.The heavy-duty self-propelled chassis are available in various drive ways 8&times;6, 10&times;8, 12&times;8, 14&times;8, 14&times;12, with hydraulic steering system which ensures good drilling accessibility, cruise capability and lateral stability, and also the working reliability of every component./r/n3.The matching between the engine and the transmission box ensures high driving efficiency and high working reliability. The drawworks and rotary tables can be driven by motors.4.The drilling rig main brake can be band brake or hydraulic disc brake, and the auxiliary brake can be water cooling thrust plate pneumatic brake or water brake.5.The rotary table transmission box provides forward-reverse shift, which is suitable for DP make up and break out operations, and is equipped with a reverse torque release device that ensures the DP deformation force releases safely./r/n6.The mast, which is front-open and double-sectioned with an inclination angle or with an erective double-section, can be raised up or laid down and telescoped hydraulically.7.The drill floor is twin-body telescopic type or parallelogram structure, which is convenient for hoisting and transportation. The dimension and height of the drill floor can be designed based on customers&rsquo; requirements.8.The configurations of the solid control system, well control system, high-pressure manifold system, generator house, engine pump house, doghouse and other auxiliary equipment can meet the different requirements of the end-users.

Product Album

Product Album

Truck Mounted Drilling Rig